 Coaxial Protection
|
The CRITEC CSP
range of surge diverters offer economical and reliable protection
from transients on coaxial antenna RF feeders cables.
They are comprised of a leadless gas discharge tube (gas arrester)
housed in a chrome plated brass block. Careful design and precision
machining has allowed the match between the characteristic impedance
of the unit and the cable to be optimized. This attention to
detail has resulted in a unit capable of operating at typical
power and frequency levels of 1000W and 3GHz respectively, whilst
minimizing the insertion and return losses.
Notes: How to Choose the Correct CSP For RF circuit protection the CSP is available with a choice of two nominal clamping voltages. The selection of the CSP unit is based on the peak transmitting power of the communication circuit. From this, the peak circuit voltage is calculated and the CSP with the next highest clamping voltage is selected. The formula is: Vpeak = VSWR x 1.4 x Sqrt(50 x Transmit Power) Where VSWR is the Voltage Standing Wave Ratio (use 1.5 if unsure) and Transmit Power is in Watts. If Vpeak <72V use CSPxxx90 If Vpeak >72V & <480V use CSPxxx600 Ordering Information
|
