Ground Rod Clamp           Eritech Ground Rod Clamps from ERICO provide a cost-effective method for connecting conductors to ground rods or rebar. The CP58 and CP34 clamps are designed to withstand a minimun torque of 300 in-lbs. The HDC Series is designed to withstand a minimum torque of 450 in-lbs. The Eritech CP58 Ground Rod Clamps are now UL and CSA listed for 1/2" and 5/8" ground rods and #4 rebar. The CP58 clamps are designed to accept a conductor range from #10 solid to #2 stranded. The new listing reduces stocking requirements and inventory needs. The Eritech CP34 clamp is also range taking. The CP34 can be used on 1/2", 5/8" and 3/4" ground rods. The CP34 accomodates conductor sizes ranging from a #8 solid to a 1/0 stranded. Both the CP58 and the CP34 are UL and CSA listed for direct burial. The HDC Series clamps are designed to withstand a minimum torque of 450 in-lbs. The HDC Series clamps can handle a wider range of conductors. In addition, the higher torque capability reduces potential damage to the connector from an overly aggressive installer. Features: • Manufactured from high strength bronze alloy • Durable and long lasting • Exceeds UL torque requirement by 2x • Stands up to over tightening • UL and CSA listed for direct burial • CP58 - UL approved for #4 rebar • Multiple size capability with CP58 and CP34 Part Number Ground Rod Sizes Conductor Sizes Minimum Torque Withstand CP38 3/8" #10 Sol - #4 Str 300 in-lbs CP58 1/2", 5/8" #10 Sol - #2 Str 300 in-lbs CP34 1/2", 5/8", 3/4" #8 Sol - 1/0 Str 300 in-lbs HDC12 1/2" #10 Sol - #2 Str 450 in-lbs HDC58 5/8" #8 Sol - 1/0 Str 450 in-lbs HDC34 3/4" #8 Sol - 1/0 Str 450 in-lbs HDC34SP* 3/4" #8 Sol - 3/0 Str 450 in-lbs HDC1* 1" #1 Sol - 4/0 Str 450 in-lbs * Not UL listed Back To Top

web design - www.greenehouseproductions.com